add images and text

maerospace/installation_overview.typ

@@ -6,7 +6,6 @@
         "PoE": ("Power over Ethernet",),
     ))
 
-
 #align(center)[#text(size:20pt)[EET Deployment Overview on Maerospace
 Equipement]]
 
@@ -18,4 +17,35 @@ The type of equipement is also not limited to processing servers and may include
 = Measurement Equipement
 
 The measurement equipement (thereafter refered to as the #acr("EET") box or simply the box) comprises a Hall Effect sensor, a digitizer, and a #acr("SBC").
-The box is power through #acr("PoE") and thus uses the same Ethernet cable for power and communication.
+The box is powered through #acr("PoE") and thus uses the same Ethernet cable for power and communication.
+
+#figure(
+grid(
+    columns: (1fr,1fr),
+    align(center)[#image("images/box_1.png", width:90%)],
+    align(center)[#image("images/box_2.png", width:90%)],
+),
+caption: "Example of EET box. Front and back views.",
+)<fig:box>
+
+= Planned Installation
+
+The initial installation will deploy 6 boxes to measure DC power at different point in the system.
+Because the goal is to remain minimaly invasive, only the exposed DC cables will be monitored.
+The measurement points are:
+
+ + 2 DC cable pairs from the power supply on the right (marked 1 on @fig:rack).
+ + 3 DC cables from the power supply on the left (marked 2 on @fig:rack).
+ + The gateway computer outside on the rack (not marked on @fig:rack).
+
+#figure(
+    image("images/rack_annotated.png", width:80%),
+    caption: "Some of the measurement points.",
+)<fig:rack>
+
+The following equipement will be added to the system:
+
+- 5 EET measurement boxes.
+- 5 replacement cables for the cables that are monitored.
+- 1 PoE switch.
+- #text(red)[1 on-premis aggregator server]